Tap Repair & Installation
Central Coast
Fix dripping taps, low pressure & install designer tapware
Expert Tap Repair & Installation
A dripping tap isn't just annoying — a single leaking tap can waste thousands of litres of water a year, and Central Coast water rates make that costly. Whether you need a washer replaced, a mixer serviced, or a full set of designer kitchen and bathroom tapware installed, our team handles it with upfront flat-rate pricing. We don't just swap washers — we diagnose the real cause, reseat worn tap bases, and replace cartridges so the fix lasts. From a stubborn kitchen mixer to a full bathroom renovation, we leave your tapware working perfectly and your sink spotless.
Why It's Different Here
Central Coast water is moderately hard, which means mineral deposits build up in tap seats, washers and cartridges over time — causing drips, stiff handles and reduced flow. Homes in Gosford, Erina and Wyong with older galvanised pipework also suffer from low pressure and discoloured water caused by internal pipe corrosion. Beachside suburbs see salt-air corrosion on chrome fittings faster than inland areas. We regularly reseat tapware and replace cartridges, and we can advise on pressure-boosting solutions or pipe replacement where old galvanised lines are the root cause of low pressure.
Signs You Need Tap Repair
Spot these early warning signs? Don't wait — catching problems early saves money and prevents bigger damage.
A Tap That Won't Stop Dripping
Even a slow drip wastes thousands of litres a year and drives up water bills — usually a worn washer, O-ring or cartridge.
Stiff or Hard-to-Turn Handles
Mineral build-up and worn cartridges make taps hard to operate — forcing them can crack the spindle or body.
Reduced Water Pressure at One Fixture
Low flow at a single tap is often a blocked aerator or failing cartridge — a quick, cheap fix.
Squeaking or Grinding When Turning
Noisy taps indicate worn spindles or washers grinding on a scored seat — reseating resolves it permanently.
Water Hammer or Banging Pipes
Sudden banging when taps close can damage pipework and fittings — often fixed with pressure-limiting or hammer arrestors.
Issues We Fix Every Day
Dripping or Leaking Taps
Usually worn washers, O-rings or ceramic cartridges. Hard Central Coast water accelerates wear. We reseat and replace for a permanent fix, not a temporary patch.
Low Water Pressure
Often caused by old galvanised pipework common in pre-1990s Central Coast homes, or sediment in aerators and pressure-limiting valves. We diagnose the real cause.
Stiff or Broken Tap Handles
Mineral build-up and worn cartridges make taps hard to turn. We replace cartridges and service spindles for smooth operation.
New Tapware Installation
Upgrading your kitchen or bathroom? We install mixer taps, wall-mounted tapware and designer brands with correct sealing and pressure balancing.
Leaking Mixer Tap Bases
Water pooling under a mixer tap is often a failed O-ring at the swivel base — we reseal and replace worn seals to stop the leak.
Water Hammer & Noisy Pipes
Banging or shuddering when taps close is water hammer — we fit arrestors and adjust pressure to protect your pipes and fittings.
Our Tap Repair Process
Diagnose the Cause
We don't just swap a washer — we check the tap seat, cartridge, pressure and underlying pipework to fix the actual cause of the problem.
Reseat & Replace
We reseat worn tap bases and fit quality replacement washers, O-rings or cartridges for a long-lasting, drip-free result.
Pressure & Flow Check
We test water pressure and flow, clean aerators and advise if old pipework or pressure valves need attention to prevent recurrence.
Pressure Balancing (Mixers)
For mixer and shower installations, we verify pressure-balancing and tempering so temperature stays safe and stable.
Clean-Up & Guarantee
We leave your sink and surrounds spotless and back our tap work with a workmanship guarantee.
Tapware Selection Advice
Renovating? We advise on tapware suited to your water pressure and Central Coast conditions, and install it correctly the first time.
Why Locals Choose Us
We Fix the Cause, Not the Symptom
We reseat worn tap bases and replace cartridges — not just swap washers — so the drip stays gone.
All Brands & Designer Tapware
From Dorf and Caroma to European designer brands, we install and service any tapware with correct pressure balancing.
Flat-Rate Upfront Pricing
You get a fixed price before we start, so there's no clock-watching or surprise charges — regardless of how stubborn the tap is.
Spotless, Guaranteed Work
We protect your basins, clean up thoroughly, and guarantee our workmanship on every tap repair and installation.
Tap Repair Maintenance Tips
Clean tap aerators every few months by soaking in vinegar to remove hard-water mineral build-up and restore flow.
Don't force stiff taps — call for a cartridge or reseat before the spindle cracks and the whole tap needs replacing.
Fix drips promptly: a single tap can waste up to 20,000 litres a year on Central Coast water rates.
When renovating, choose tapware rated for your home's water pressure to avoid weak flow or splashing.
Wipe chrome fittings dry in beachside homes to slow salt-air corrosion and keep them looking new.
If multiple taps have low pressure, the cause is likely old galvanised pipework — ask us about pipe replacement.
Tap Repair We Cover
- Kitchen mixer taps & pull-out sprays
- Bathroom basin & wall mixers
- Shower mixers & wall-mounted tapware
- Two-handle garden & laundry taps
- Outdoor garden taps & hose connections
- Designer & European tapware brands
Key Service Areas
Tap Repair Pricing
*$0 callout fee during business hours when work is completed. Prices are indicative — we provide a fixed written quote before starting any work.
Trusted Brands
Fully Licensed & Insured
Every Coast Plumber technician holds full NSW plumbing, drainage and gas fitting licences with comprehensive public liability insurance. Workmanship guaranteed on every job.
Tap Repair FAQ
Why does my tap keep dripping after I replaced the washer?
The tap seat is likely worn or scored, so the new washer can't seal properly. We reseat the tap base to create a flat sealing surface — the proper permanent fix.
Why is my water pressure so low?
On the Central Coast it's often old galvanised pipework corroding internally, a blocked aerator, or a failing pressure-limiting valve. We diagnose the actual cause before recommending a fix.
Can you install any brand of tapware?
Yes. We install all major brands including Dorf, Caroma, Methven, Phoenix and designer European tapware, with correct pressure-balancing and sealing.
How much water does a dripping tap waste?
A single dripping tap can waste up to 20,000 litres per year. With Central Coast water rates, fixing it pays for itself quickly — and stops the annoying noise.
What causes water hammer?
Water hammer is sudden pressure shock when a tap or valve closes fast. We fit hammer arrestors and adjust pressure to stop the banging and protect your pipes.
Do you supply the tapware or just install mine?
Both. We can install tapware you've purchased, or supply quality brands at trade pricing — we'll advise what suits your home's pressure and your budget.
Related Plumbing Services
Need Tap Repair Today?
Our Central Coast tap repair experts are on standby. Call now for fast, reliable service with upfront pricing.